Buster + Punch 4 Gang Cross Toggle Switch

A precision toggle, elevated to architecture. Four solid-metal, knurled toggles sit on a razor-flat Linear plate secured with signature metal fasteners—hardware that reads intentional, not incidental. Choose with logo for a discreet B+P mark or without logo for a pure, monolithic face. Five architectural finishes (Black, Brass, Smoked Bronze, Steel, White) coordinate across Linear dimmers and outlets for a continuous, gallery-grade look.

Each gang is a dedicated on/off toggle, machined in solid metal for a crisp, tactile click. The US-ready Linear plate aligns with matching B+P modules for a cohesive installation, and the assembly is listed for North America. Electrical spec supports single-pole or 3-way wiring on typical 120–277 VAC, 15A, 60 Hz circuits. Select with logo or without logo at purchase; both variants share identical construction, toggles, and finish options. Install to a standard US box in dry, indoor locations by a licensed electrician.

Key specs

• Configuration: 4-gang plate with four individual on/off toggle modules

• Variants: with logo · without logo (same specs/finishes)

• Finishes: Black · Brass · Smoked Bronze · Steel · White

• Electrical: 120–277 VAC · 15 A · 60 Hz · single-pole or 3-way

• Certification: cETLus (North America)

• Included: 1× 4G Linear wall plate · 4× toggle modules · 4× toggle detail kits · mounting hardware

• Materials: solid-metal toggles and fasteners; metal faceplate

Spec Sheet