Buster + Punch 2 Gang Linear Toggle Switch

A precision toggle, elevated to architecture. Two solid-metal, knurled toggles sit on a razor-flat Linear plate secured with signature metal Torx® fasteners—hardware that reads intentional, not incidental. Choose With Logo for a discreet B+P mark or Without Logo for a pure, monolithic face. Five architectural finishes (Black, Brass, Smoked Bronze, Steel, White) coordinate across B+P Linear dimmers and outlets for a continuous, gallery-grade look.

Each gang is a dedicated on/off toggle built in solid metal for a crisp, tactile click. The US-ready Linear plate aligns with matching B+P dimmers and outlets for a cohesive, gallery-grade look across the room. Electrical spec supports single-pole or 3-way wiring on typical 120–277 VAC, 15A, 60 Hz circuits and is cETLus listed for North America. Select With Logo or Without Logo at purchase—both variants share identical construction, toggles, and finishes. Install to a standard US box in dry, indoor locations by a licensed electrician.

Key Specs

• Configuration: 2-gang plate with two individual on/off toggle modules
  
• Variants: With Logo · Without Logo (same specs/finishes)
  
• Finishes: Black · Brass · Smoked Bronze · Steel · White
  
• Electrical: 120–277 VAC · 15 A · 60 Hz · single-pole or 3-way
  
• Certification: cETLus (North America)
  
• Included: 1× 2G Linear wall plate · 2× toggle modules · 2× toggle detail kits · mounting hardware
  
• Materials: Solid-metal toggles & fasteners; metal faceplate

Spec Sheet